RING STRETCHER ENLARGER REDUCER JEWELRY BENCH TOP SIZER BAND SIZING REPAIR TOOL

Adjust the size of different rings with ease using the Ring Stretcher and Reducer. You can increase and decrease the sizes of rings quickly and accurately. You can save time by using this product rather than adjusting the size by hand. With the stretcher (top part): you can size your ring, typically a band (not recommended for rings with prongs as it can easily open up your prongs making the setting of your ring loose), a small amount quickly. Steps: 1. Anneal your band. 2. Pickle it. 3. After placing the ring onto the stretcher rod, compare the size reading on the rod to your ring mandrel reading (all mandrel sizing is different from brand to brand so make a note of the variance if there is one). 4. Slowly push the lever until you feel resistance, at that point very gently push the lever. 5. Flip the ring over and repeat. 6. Check ring size frequently on your mandrel to avoid stretching your ring out too much. 7. Reshape if it has warping 8. Refinish the ring Product Features: -If the ring has a stone, you must stop and study your stone to make sure it is compatible with this item. -Before using the stretcher/reducer you should anneal your ring. -Not recommend for making a large change in sizing or for rings that have stones in them; as altering the size may make the setting less secure. If you use it on a ring that has a stone set you should do so carefully, mindfully, and at your own risk. With the reducer (the bottom part): you can size your ring, typically a band, a small amount quickly with this reducer.

• RING STRETCHER ENLARGER REDUCER JEWELRY BENCH TOP SIZER BAND SIZING REPAIR TOOL